TERADEK BOLT 1000 XT

WIRELESS TRANSMISSION OVERVIEW

The Bolt 1000 XT 3G-SDI/HDMI Wireless Kit from Teradek includes one transmitter and one receiver. This set enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features 1000' line-of-sight transmission distance when used together. You can send and receive visually lossless 3G video signals from a Bolt 1000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, 480p, and 576p are only supported via HDMI. You can transmit up to three other third-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

SPECS

  • < 1 ms

  • 1000' / 304.8 m (Line-of-Sight)

  • SDI/BNC:

    1080p 4:2:2 YCC 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps

    1080PsF 4:2:2 YCC 8-Bit at 23.98, 24, 25, 29.97, 30 fps

    1080i/720p 4:2:2 YCC 8-Bit at 50, 59.94, 60 fps

    576i/480i

    HDMI:

    1080p 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps

    1080PsF 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps

    1080i/720p 4:4:4 RGB 8-Bit at 50, 59.94, 60 fps

    576p 4:4:4 RGB 8-Bit at 50 fps

    480p 4:4:4 RGB 8-Bit at 59.94 fps

    576i/480i

  • Bolt 1000 XT TX

    Antenna Ports

    2 x RP-SMA Female

    Video Connectors

    1 x HDMI Input

    1 x BNC (3G-SDI) Input

    1 x BNC (3G-SDI) Loop Output

    Other I/O

    1 x USB Micro-B Input

    Bolt 1000 XT RX

    Antenna Ports

    5 x RP-SMA Female

    Video Connectors

    1 x BNC (3G-SDI) Output

    1 x HDMI (HDMI 1.4) Output

    Other I/O

    1 x USB Mini-B USB 2.0 Input

  • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)

    HDMI: RGB 4:4:4, 8-bit

  • Bolt 1000 XT TX

    Audio Compression: 48kHz 24-bit PCM

    Audio Input: Embedded SDI/HDMI Audio Input (2 channel)

    Audio Output: N/A

    Bolt 1000 XT RX

    Audio Compression: 48kHz 24-bit PCM

    Audio Input: N/A

    Audio Output: Embedded SDI/HDMI Audio Input (2 channel)

  • Frequencies

    Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz

    DFS Frequencies: 5.270 ~ 5.670 GHz

    RF Channel Selection

    Auto, Manual

    Encryption

    128-Bit AES

    Noise Rejection

    Can coexist with WiFi and 5GHz cordless phones

  • Bolt 1000 XT TX: 17 dBm

    Bolt 1000 XT RX: 17 dBm

  • Power Input

    Bolt 1000 XT TX: 2-Pin Circular locking connector 7-28 VDC

    Bolt 1000 XT RX: 2-Pin Circular locking connector 7-28 VDC

    Battery

    Bolt 1000 XT TX: None

    Bolt 1000 XT RX: None

    Nominal Power Consumption

    Bolt 1000 XT TX: 7.5 Watts

    Bolt 1000 XT RX: 8.5 Watts

    Operating Temperature

    Bolt 1000 XT TX: 0-40°C

    Bolt 1000 XT RX: 0-40°C

  • Dimensions

    Bolt 1000 XT TX: 24 x 66 x 101.5mm

    Bolt 1000 XT RX: 89 x 138 x 24mm

    Weight

    Bolt 1000 XT TX: 226 g

    Bolt 1000 XT RX: 376 g